Brown Tripoli Compound Fast Cutting Removes Scratches on All Metals Pre-Polish

Description

BROWN TRIPOLI
METAL CUTTING COMPOUND
METAL BUFFING COMPOUND MATERIAL -
4oz BAR
FAST CUTTING REMOVAL OF SCRATCHES
The Brown Tripoli is formulated for fast cutting, it’s composition is made for removing lines and marks on surfaces, recommended to remove and eliminate scratches and imperfections.
Brown Triploi compound works on all metals as well as plastics.
Tripoli is a good cutting compound for a wide range of metals including gold and silver,aluminum, brass, copper, zinc, plastics and soft composites.
NOTE:
We have included polishing recommendations at the bottom of this page, to assist you.
BROWN TRIPOLI
JETS Product # 1614-20304
Made in USA
-
Rectangular Bar Sizes:
5" x 1" x 1-1/8"
-
Bars Weight:
4oz. (+ Slightly More)
·
Utilizes Quality Grade Abrasives
·
Combined with Additives
·
Long Lasting Composition
·
Good Adhesion to Buffing Wheels
·
Minimal Residue
·
No Discoloration
·
Produces - Fast Cutting
SALE
IS FOR 1 BAR
SHIPPING: Via USPS MAIL FIRST CLASS
NOTE: Visit
JETS INC.
ebay Store Listings, where you can see the compounds for various Metals and Applications, Polishing Compounds, Felt and Muslin Buffs and Buffing Wheels and a selection of
J
ewelers
E
quipment
T
ools
&
S
upplies
.
JETS Inc.
POLISHING RECOMMENDATIONS:
Our recommendations and suggestions on Buffing to obtain the best results possible:
·
Use the right compound for the metal that you are trying to polish
·
It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
·
Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
·
Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
·
Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.
If you have to then make sure buffs are cleaned (dressed) with a buff rake.
·
A clean buffing wheel edge is important.
·
Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.
·
Whenever you are working with Platinum never use a buff that was used for another type of metal.
WORK SAFE!
Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed
.
PROTECTION -
Protect yourself, your fingers and hands, your face and eyes and use respirators
.
721  E8 CKSP M